|
|
|
|
|
Most Teflon coated bits may look the same but aren't. GAEC Teflon coated
bits are superior. GAEC Teflon has a different chemical formulation and
is applied differently then other Teflon coated drill bits. GAEC
Teflon bits are tougher and hold up longer then. Standard Teflon
coated bits showed wear after 50 lifts of drilling; so called premium
Teflon coated bits showed wear after 400 lifts; GAEC Teflon, we stopped
testing after 1500 lifts with no real signs of wear! |
|
|
GAEC fluted drills are designed to handle your toughest stocks. The four
flutes force the chips to "cup" tightly so they can flow easily and
cleanly up and out of the drill bit. Not recommend for soft stocks.
Limited sizes and styles available. |
|
|
GAEC Marvel drills are carbide coated (also called diamonized). The
carbide coating is fused to the outside of the drill bit to give you the
longest lasting cutting edge for those really hard to drill stocks.
Limited sizes and styles available. |
|
|
GAEC Titanium coated drills are the toughest. The
coating is sprayed on the outside of the drill bit without increasing
the diameter to give you the
toughest, longest lasting cutting edge for those really, really hard to drill stocks.
Most sizes and styles available. |
|
►Drill
Bits |